discharge of ion

英 [dɪsˈtʃɑːdʒ ɒv ˈaɪən] 美 [dɪsˈtʃɑːrdʒ əv ˈaɪən]

离子放电

化学



双语例句

  1. High discharge current performance of lithium ion bettery is introduced.
    研究了锂离子电池大电流放电性能。
  2. Study on Photoionization Produced by Discharge in Atmospheric Air by Numerical Method Determination of free solanesol in tobacco by liquid chromatography and atmospheric pressure chemical ionization ion trap mass spectrometry
    大气压下流注放电光电离过程的数值仿真液相色谱-大气压化学电离离子阱质谱法测定烟草中的游离茄尼醇
  3. The dielectric barrier surface discharge process is simulated using Poisson's equation and drift-diffusion equation and the distribution history of electron, ion and electric field is gained.
    采用泊松方程和漂移-扩散方程对介质阻隔面放电进行数值模拟,得到了电子、离子以及电场分布随时间的变化。
  4. Discharge characteristics of Ar plasma in the MEP were measured with Langmuir probe and ion energy analyzer.
    采用朗谬探针和离子能量分析器,测量了MEP中Ar等离子体的放电特性。
  5. The method to measure the vacuum degree in sealed vacuum tube is investigated by using pulse discharge. The theoretic model of ion current and the apparatus to measure vacuum degree are established. The experimental results are presented and analyzed.
    采用脉冲放电的方法研究了密封真空管真空度的测量方法,建立了离子流的理论模型和真空度的测量装置,给出了测量结果,并进行了讨论。
  6. Discharge behavior of vacuum arc ion source working in pulse mode
    真空弧离子源脉冲工作瞬间的放电行为
  7. The dependence of the discharge arc current on the arc voltage and the filament heating current, and the dependence of the ion extracting efficiency on the arc current and the working gas pressure have been studied.
    研究了灯丝加热电流、弧压对弧流的影响和弧流与工作气体压力对离子束引出的影响规律。
  8. Study on charge discharge properties of carbon materials used as anode of lithium ion secondary battery
    锂离子蓄电池负极碳材料充放电性能的研究
  9. Effect of Nafion latex taken as electrode additive on discharge property of ion exchange membrane fuel cells
    电极添加剂Nafion乳液对离子膜燃料电池放电性能的影响
  10. An ideal impurity transport code has been used to simulate impurities ( carbon and oxygen) behaviour during the OH discharge. The profiles of impurities diffusion and convection coefficient, impurities ion densities in different ionized state, loss power density and effective charge number have been derived.
    建立完备的杂质输运程序,数值模拟碳、氧杂质在欧姆放电时的输运行为,得出了杂质的扩散和对流系数、不同电离态杂质离子密度、辐射功率密度和有效电荷数的空间分布。
  11. The computed result showed the ANN method was a quite accurate algorithm, and could be used in prediction of discharge capacity of lithium ion batteries.
    结果表明,ANN方法具有足够的精度,可用来预测锂离子电池的放电容量。
  12. The charge/ discharge mechanism of Fe3+/ Fe2+ ion pair in the EC systems was discussed and a new type of redox electrolyte electrochemical capacitor was suggested.
    根据实验现象及结果,探讨了Fe3+/Fe2+离子对在EC电极上的充放电机理,并提出了一种新的概念&氧化还原电解液电化学电容器。
  13. Prediction of discharge capacity of lithium ion batteries based on artificial neural network method
    基于ANN方法的锂离子电池放电容量预测
  14. In this article, double layer glow discharge is discussed in terms of the theory of gas discharge and experiments on ion nitriding equipment and technology.
    本文在离子氮化装置及离子氮化工艺试验研究的基础上,根据气体放电理论,提出并讨论了双层辉光放电现象。
  15. The simulation results have provided useful references for these problems such as thermal cathode primary electron emission, the determination of ion beam derivation area and the effective confinement of discharge plasma in the design of ion source.
    计算结果对于离子源设计中的阴极热电子发射、离子束有效引出面积确定及等离子体的有效约束等重要问题有一定参考价值。
  16. The experiments show when the discharge power is 16W the temperature of the ion gun body is 300 ℃, so water cooling is not necessary.
    实验结果表明,我们研制的这种枪在放电功率为16W时,枪体的温度为300℃,因而不需水冷;
  17. The emission character and discharge character of a purchased LaMo cathode material applied in high current ion source are measured.
    对从美国购进的强流离子源新型LaMo阴极的发射特性以及用于强流离子源阴极的放电性能进行了测试。
  18. The experimental results show that in most cases, only one cathode spot can be found in the discharge zone of vacuum arc ion source, and the spot moves a little during the same discharge.
    实验结果表明,当脉冲工作电流为101&102A时,真空弧离子源放电区一般只有单个阴极斑,阴极斑的位置在同一次放电中的变化很小;
  19. In this work, the effect of the carbonization temperature, calefactive velocity and concentration for treatment on the structure and charge/ discharge properties of active carbon material obtained from rice husk used in the lithium ion battery was investigated.
    本文主要研究了炭化温度、升温速率以及碱处理浓度对稻壳制备锂离子电池负极材料结构及充放电性能的影响。
  20. Influence of Gas Supply to Neutralizer Tank on Discharge Characteristics of Neutral-Beam-Injection Ion Source
    中性束注入器Tank充气特性对离子源放电的影响
  21. The process of particle charging in pulse corona discharge consists of two periods, the electron charging in pulse discharge duration and the ion charging after the pulse discharge duration.
    脉冲流光放电粒子荷电过程分2个阶段,在脉冲放电期内为电子荷电,脉冲期过后为离子荷电。
  22. This article reviews the basic physics of ECR discharge and experimental research, and describes new applications of ECR plasma in surface processing, plasma coating and ion source.
    本文综述了ECR放电的基本物理过程和实验研究概况,介绍了ECR等离子体在表面处理、镀膜和离子源等方面应用的最新结果。
  23. Study on the technology of the hydrogen energy to generate electricity(ⅲ): the effect of the ion exchange membrane on the discharge property of the ion exchange membrane fuel cells
    氢能发电技术的研究(Ⅲ)&离子交换膜对离子膜颜料电池放电性能的影响
  24. The pulsed multi arc ion source has been used to prepare diamond like ( DLC) film and metal film and alloy film. This paper studies its method of ignited arc, stability of discharge and influence of structure of pulsed multi arc ion source on deposition uniformity.
    脉冲多弧离子源主要用来镀制类金刚石薄膜及金属、合金膜,研究了脉冲多弧离子源的引弧方法、放电的稳定性、离子源结构对镀膜均匀性的影响。
  25. It was found that the internal resistance of battery was reduced and the cycle performance and discharge performance at higher and lower temperature was improved after VC was added into organic electrolyte of polymer lithium ion battery.
    发现聚合物锂离子电池有机电解液中加VC以后,降低了电池的内阻,提高了循环性能与高低温放电性能。
  26. Study on Charge/ Discharge Basic Performance of Lithium Ion Rechargeable Battery for Electric Vehicle Applications
    锂离子动力蓄电池充放电基本性能的研究
  27. The distribution in discharge space, time change of electric field intensity, electron and ion density and the current density are calculated.
    分别计算和分析了介质阻挡放电中电场、带电粒子浓度以及电流密度在放电空间的分布和随时间的演变过程。
  28. Discharge Process of Insertion Electrodes Controlled by Lithium Ion Diffusion in Solid Materials
    锂离子固相扩散控制下的材料放电过程
  29. For this purpose, we gradually carry out combining the consistency control and total control of pollution emission, forbidding to discharge pollutants that exceed the stipulated standards, and strengthening the superior of pollutant emission in the center of permit ion of the pollutant emission.
    为此,我国逐步实行了污染物排放浓度控制和总量控制相结合,禁止超标排污,以排污许可为核心,加强污染物排放监督管理等新的污染防治措施。
  30. Based on the method of the PIC-MCC, conduct the simulation for the discharge process of the ion source, find the relation between the beam performance and the influencing parameter of the working volt, operating pressure, type of gas and substrate bias.
    通过运用等离子体PIC-MCC粒子模拟方法,对线性离子源的放电过程进行计算机模拟,并探究出工作电压、工作气压、工作气体种类以及基片偏压等参数对离子源束流性能的影响。